Welcomes to EnergyServs tutorial for resetting the Wi-Fi settings of your MyEnergi Eddi or Zappa and reconnecting to a new router. To begin with we go to the device itself and we press the menu button. After we have done that we head to Device Settings, were we scroll down to advanced, it may ask for a password here. The password is Zero, Zero, Zero, Zero so you just press enter four times.
Once your on the advanced screen we come down to system and we select reset Wi-Fi Settings. It will ask us to confirm twice, which we do. After the Wi-Fi settings have been restored, we then need to turn the Wi-Fi back on. So go to Internet, Wi-Fi, Configuration, Access Point on.
When the access point has been activated, we press back, and we are given the SSID and the Password for the Device itself. These are what we will look for when we connect to the Eddi. Now the settings are reset and the Wi-Fi has been activated we come to our phone, we scroll down and we select our Wi-Fi settings and we will see here MyEnergi_ followed by some letters and numbers that is the one we like to select. The password for this will be given to you.
When the Password is entered it will take 5 to 10 seconds to reload the page, when the page is reloaded you will be offered 3 settings, Detected Networks, Networks and Password. You click on Detected Networks, Pick Your Wi-Fi and then you enter your password on the bottom one. When connected it will ask you to sign into the MyEnergi Network and it will ask you to create a new Password. Enter a password you are happy with and continue to the next page. If you where not previously connected go to the PlayStore on your mobile phone and download the MyEnergi App.
Follow the instructions when open to setup a new account. Eventually it will ask you for a reg code and a reg ID. To find these you come back to the menu, come to information and we look for page 2. Reg S/N, Reg Code. You must put in the hyphen and you must keep the small letters small and the Capital Letters Capital.After this we can head back to the device, we will see on the screen if it is connected or not.
As you can see this device is now connected to the internet so it should be be visible on the app if it is connected if you are connected already, followed by connect. You then reach a screen that says MyEnergi Wf-Fi Config change reloading
